EXFO FTB-1, User Manual

Page: 277 / 675

Test Setup - Test Configurator, Timer, and System
NetBlazer
265
Streams - Global

Addressing indicates the source and destination IP addresses for each
stream. Tap on the
Addressing
button to modify the addressing (see
MAC and IP from the MAC/IP/UDP tab).
Batch
button allows bulk configuration for stream addressing. Select
the check box of each configuration parameter that needs to be copied
and set its parameters. From
Apply To
, select all streams the copy
applies to and tap on the Copy From to proceed.
The following parameters are global for all streams.

Total TX Rate indicates the percentage of the total line utilization
which is the TX rate sum of all enabled streams.

Link Capacity indicates the total rate available for traffic generation.

Global Options
:

Rate Unit choices are % (default), Mbit/s , Gbit/s , frame/s , and IFG .

QoS Metrics Tags Insertion
check box when selected (default)
automatically adds a stream analysis tag containing Jitter, Latency,
Throughput, and sequence tags in all frames that will be
generated.

Copy Stream
button allows to copy the stream configuration to one or
several streams.
Select the stream number the configuration will be copied from.
From To the following Streams , select all streams that will inherit the
configuration from the selected stream. An orange background
represents a selected stream. A stream that is already enabled (Enable
TX) cannot be selected for copy.
Tap Copy to confirm the stream configuration copy for all selected
streams.

Restore Default button reverts the current test application to its default
factory settings.