EXFO FTB-1, User Manual

Page: 176 / 675

Test Setup - Test Configurator, Timer, and System
164
FTB-700G/800 Series
ISDN PRI - Call Management

Call

Type
selects the service type:
3.1 kHz
,
Speech
, or
Data
(default).

Rate is only configurable for Data type: 56K or 64K (default). The
rate is set
64K
for
3.1 kHz
and
Speech
types as well as for
Euro Q.SIG switch type.

Network

Transit Net Code (Transit Network Code) selects a specific
network on which the call is placed and is only applicable in
TE
-
Emulation Mode . The range is from 0 to 9999 . By default this field
is blank meaning that no Transit Network Selection code is
transmitted. Not supported with
Euro Q.SIG switch type.

Operator Sys Access
(Operator System Access) determines
whether or not an operator is used: Disabled (default), Principal ,
and
Alternate
. Only applies to
National ISDN
switch type,
Speech
and 3.1 kHz call type, and in TE - Emulation Mode .
Answer Mode
Allows the selection of the call answering mode.

Auto-Answer (default) answers all incoming calls automatically.

Auto-Reject
rejects all incoming calls automatically.

Prompt : asks to answer or reject a call. A call answered or rejected is
removed from the table in the
Answer Prompt
window. All incoming
calls are listed in the received order.
Calls can be answered or rejected individually (
Answer
/
Reject
) or
collectively ( Answer All / Reject All ).
The
Close
button is available once all calls are answered or rejected.