EXFO FTB-1, User Manual

Page: 514 / 675

Test Functions
502
FTB-700G/800 Series
Ping & Trace Route
Ping

Data Size (Bytes) : Enter the data size that will be sent to the network
device to be detected. Choices are
0
to
1452 bytes
;
32 bytes
by
default.

TTL
for IPv4 and
Hop Limit (TTL)
for IPv6: Enter the maximum
number of hops the packet can go through. Choices are 1 to 255 ; 128
by default.

IP TOS/DS for IPv4 and Traffic Class (TOS/DS) for IPv6: Enter the type
of service. Choices are
00
(default) to
FF
.

Flow Label (IPv6) value acceptable range is from 0 (default) to
1048575
.

Timeout (ms) : Enter the maximum time allowed between an ICMP
echo and response. Choices are
200 ms
to
10000 s
;
4000 ms
by
default.

Delay (ms)
: Enter the delay between each attempt (PING). Choices
are 100 to 10000 ms ; 1000 ms by default.

Attempts:
Select
n-Attempts
to specify the number of ping requests to
send following a ping activation or select Continuous to ping
continuously until manually stopped. If
n-Attempts
is selected, enter
the number of ping attempts from 1 to 100. The default setting is
n-Attempts
with
4
attempts.

Ping button starts the ping tool with the specified settings.