EXFO FTB-1, User Manual

Page: 119 / 675

Test Setup - Test Configurator, Timer, and System
NetBlazer
107
Modify Structure Button

Loopback Mode
Note:
Only available for Smart Loopback Ethernet test application.
Transparent (Pseudo-Physical ) check box when selected (cleared by
default), determines that the Smart Loopback operates as a physical
loopback by transmitting all received frames unaltered and without
discrimination. When the check box is cleared, the Loopback mode is
selectable from
Loopback on page 262.
In transparent mode, the
Network
tab and the
Ping & Trace Route
functions are not available.
Note:
The Transparent mode is intended to be used for point-to-point topology;
not for switched or routed networks. Use the Transparent mode with
caution because all received frames are looped back without
discrimination.

OAM Type
Note:
Only available for Carrier Ethernet OAM test application.
Selects the type of Carrier OAM network:
Ethernet OAM
(S-OAM;
default), MPLS-TP OAM , or Link OAM .

S-OAM
check box when selected, enables S-OAM on all services.