EXFO FTB-1, User Manual

Page: 242 / 675

Test Setup - Test Configurator, Timer, and System
230
FTB-700G/800 Series
Services - Global
Services - Global
From the
Test
menu, tap
Setup
,
Test Configurator
, tap on the services
block, the Global tab, and on the General button.
General Button
The following parameters are displayed and configurable per service.

Check boxes:

The first check box (top-left) allows to sequentially enable
service(s) within the limit of the link capacity when the
Service
Performance Test is enabled or enable all services when the
Service Performance Test
is disabled.

The check boxes next to the service numbers allow to enable each
service individually.
When the Service Performance Test is enabled, up to 10 services
can be enabled one after the other, as long as the
Total TX Rate
(bandwidth) is not reached ( Committed ). For example, if the first
service is using the full bandwidth available, then no other service
can be enabled. If the first enabled service uses half bandwidth,
then at least another service can be enabled using up to half
bandwidth. Thus, to enable a second service, first set the CIR value
within the non-used bandwidth (
Available
), then enable it.
When the Service Performance Test is disabled, up to 10 services
can be enabled one after the other; the total TX rate is not limited.

Service Name indicates the name of each service. Tap on the Service
Name
button to modify the name of each service. See
Services - Profile
on page 233 for more information.

Direction
, available with
Dual Test Set
, indicates results from local to
remote ( L->R ) and remote to local ( R->L ).

Frame Size
indicates the frame size of each service. Tap on the
Frame
Size button to modify the frame size of each service.