EXFO FTB-1, User Manual

Page: 407 / 675

Test Results
NetBlazer
395
Summary
Traffic / Traffic Ethernet
Note: The Traffic statistics are available for Smart Loopback and Through Mode
test applications. See
Traffic - Ethernet
on page 446 for more information.
CPRI
Note:
Available with CPRI Framed L2.

Sequence indicates the last Sequence State parameter: Standby (A) ,
L1 Sync (B)
,
Protocol (C)
,
L2 C&M (D)
,
Vendor (E)
,
Operation (F)
,
and Passive (G) . The pass/fail verdict is also displayed when enabled.

Frame Sync
indicates that the startup sequence synchronization status
as per L1 Sync Status parameter: active (green) or inactive (red).

Protocol
indicates either the last received (
Version 1
or
Version 2
) or
negotiated ( Auto ) protocol version. A red background indicates a
Protocol version mismatch.

C&M indicates either the received (HDLC or Ethernet) or negotiated
(Auto) C&M for Ethernet subchannel and HDLC rates in Mbit/s. A red
background indicates either a C&M type mismatch or HDLC
Rate/Ethernet subchannel mismatch. An arrow is displayed indicating
which C&M Channel, Ethernet or HDLC, is selected following the
negotiation process.

Code Word (CW) indicates the transmitted and received Code Word
count.

Hyperframe indicates the transmitted and received hyperframe count.

L1 Reset
, available when
Remote Radio Head
emulation mode is
selected, indicates the number of times a request to reset the RRH
interface was received.