EXFO FTB-1, User Manual

Page: 297 / 675

Test Setup - Test Configurator, Timer, and System
NetBlazer
285
Traces (SONET/SDH)
ITU T.50 Characters on page 39.

TIM-S/RS-TIM
,
TIM-P/HP-TIM
,
TIM-V
/
LP-TIM
: Enables the
corresponding Trace Identifier Mismatch for the expected message
defined. These settings are coupled with the
Result - Traces/Labels
configuration (refer to Traces - SONET/SDH on page 445).
Format
: Allows the selection of the expected format:
16 Bytes (default), or 64 Bytes .
Expected
: Allows entering the expected J0 trace message for
TIM-S/RS-TIM, J1 for TIM-P/HP-TIM, and J2 for TIM-V/LP-TIM. See
Default values/messages
on page 284.
TCM Access Point Identifier
Note:
Available when TCM is enabled from the
Signal - Signal Configuration
(SONET/SDH) on page 258.

STS/AU Path (N1)
, and
VT/TU Path (Z6 or N1 (TU-3))
Enter the N1/Z6 value/message to be generated.

TC-TIM-P/HPTC-TIM/TC-TIM-V/LPTC-TIM
: Enables the corresponding
TCM Access Point Identifier for the expected message defined. These
settings are coupled with the Traces configuration from
Traces
(SONET/SDH) on page 284.
Copy RX
allows to use the received TIM message as the expected one.