EXFO FTB-1, User Manual

Page: 162 / 675

Test Setup - Test Configurator, Timer, and System
150
FTB-700G/800 Series
Interface (Ethernet, Packet Sync, Fibre Channel, and Wireless)

Speed , available with 10/100/1000M Electrical interface, allows the
selection of the interface rate:
10M
,
100M
,
1GE
, or
Auto
1
. The
negotiated speed will be displayed next to the Speed field selection.
The
10M
speed is not available with SyncE test application.

Duplex choices for 10M and 100M electrical interfaces are
Full Duplex
(default),
Half Duplex
, and
Auto
1
. For other rates the
Duplex is set to Full Duplex . Availability of choices depend on the test
applications. The negotiated duplex will be displayed next to the
Duplex field selection.

Flow Control
choices are
TX
,
RX
,
RX and TX
,
None
(default), and
Auto
1
. When the Flow Control is set to None , pause frames received
are ignored. Availability of choices depend on test applications.

Cable Mode is available with 10/100/1000M Electrical interface.
Availability of choices depend on the test application.
Manual mode is selected when the Auto-Negotiation check box is
cleared and allows to select the type of cable:
MDI
(default) for straight
through cable or MDIX for crossover cable.
Automatic
mode is selected when the
Auto-Negotiation
check box is
selected and allows the FTB-700G/800 Series to automatically detect
the MDI or MDIX cable type.

Local Clock is only available with 1GE interface and allows to set the
provenance of the clock:
Master
(default), or
Slave
, or
Auto
1
,
2
.
1.
Auto
is only available when the
Auto-Negotiation
check box is selected.
2. Not available with SyncE test application.