EXFO FTB-1, User Manual

Page: 425 / 675

Test Results
NetBlazer
413
Summary (iSAM)
RFC 6349 Test

Test Status indicates the actual test status as follows.

MTU (bytes)
is the validated Maximum Transfer Unit.

Minimum RTT (ms) is the minimum time between the first bit of a
segment sent and the last bit of the corresponding acknowledge.

TCP Throughput

Service
indicates the service’s number and name. The pass/fail
verdict icon is displayed next to the service name. A fail verdict is
declared if any of the following conditions occurs: Link Down,
LOS, TCP Throughput verdict failed, or an abort condition
(Timeout, DTS connection lost, unresolved address, user stopped,
configuration synchronization error, invalid MTU).

L->R
and
R->L
indicates respectively the direction from local to
remote and remote to local.

Window
indicates the total Max Window (1 KiB = 1024 bytes)
followed by the number of connections and KiB per connection in
parenthesis as follows: (n conn.@ n KiB).
Test Status Description
“--” Test has not started.
In Progress The test is running.
Completed , <Verdict> Test has completed and the test pass/fail verdict is displayed
when enabled. A fail verdict is declared if any of the following
conditions occurs: Link Down, LOS, TCP Throughput verdict
failed, or an abort condition (Timeout, DTS connection lost,
unresolved address, user stopped, configuration
synchronization error, invalid MTU).
Aborted , < reason > Test has been aborted either manually (Stop) or automatically
from an alarm and the reason is displayed as follows:
Link down alarm , LOS alarm , Timeout during execution ,
DTS connection failed , Invalid Configuration ,
Unresolved addresses , Invalid MTU , User Stopped