Parameters
multiplier
Specifies an integer that sets the multiplier for the hello holding time. Never configure a
hello-multiplier lower than the default (3). The range is from 3 to 1000. The default is
3
.
level-1
(OPTIONAL) Select this value to configure the hello multiplier independently for Level 1
adjacencies. This value is the default.
level-2
(OPTONAL) Select this value to configure the hello multiplier independently for Level 2
adjacencies.
Defaults
multiplier =
3
;
level-1
(if not otherwise specified)
Command Modes
INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.10(0.0)
Introduced on the S6100–ON.
9.8(1.0)
Introduced on the Z9100–ON.
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.7(0.0)
Introduced on the S6000-ON.
9.5(0.1)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.12.0
Introduced on the S4810.
8.3.11.1
Introduced on the Z9000.
Usage Information
The holdtime (the product of the hello-multiplier multiplied by the hello-interval) determines how long a neighbor
waits for a hello packet before declaring the neighbor is down so routes can be recalculated.
Related Commands
•
— specify the length of time between hello packets.
isis hello padding
Turn ON or OFF padding of hello PDUs from INTERFACE mode.
Syntax
isis hello padding
To return to the default, use the
no isis hello padding
command.
Defaults
Padding of hello PDUs is enabled (ON).
Command Modes
INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
866
Intermediate System to Intermediate System (IS-IS)
