manualshive.com logo in svg

Dell S6100, Configuration Manual, Page: 1191 / 1743

Share
Download
Dell S6100 Configuration Manual Download Page 1191

bit

(OPTIONAL) For the TCP protocol type only, enter one or a combination of the following 
TCP flags:

•

ack

 = acknowledgement

•

fin

 = finish (no more data from the user)

•

psh

 = push function

•

rst

 = reset the connection

•

syn

 = synchronize sequence number

•

urg

 = urgent field

operator

(OPTIONAL) For TCP and UDP parameters only. Enter one of the following logical 
operand:

•

eq

 = equal to

•

neq

 = not equal to

•

gt

 = greater than

•

lt

= less than

•

range

 = inclusive range of ports (you must specify two ports for the 

port

command 

parameter.)

Defaults

None

Command Modes

REDIRECT-LIST

Command History

This guide is platform-specific. For command information about other platforms, see the relevant 

Dell Networking 

OS Command Line Reference Guide

.

Version

Description

9.10(0.0)

Introduced on the S6100-ON.

9.8(1.0)

Introduced on the Z9100-ON.

9.8(0.0P5)

Introduced on the S4048-ON.

9.8(0.0P2)

Introduced on the S3048-ON.

9.7(0.0)

Introduced on the S6000-ON.

9.5(0.1)

Introduced on the Z9500.

9.4(0.0)

Introduced on the S4810, S4820T, S6000, and Z9000.

8.4.2.1

Introduced on the C-Series and S-Series.

8.4.2.0

Introduced on the E-Series.

7.5.1.0

Introduced on the E-Series.

Policy-based Routing (PBR)

1191

Summary of Contents for S6100
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments