manualshive.com logo in svg

Dell S6100, Configuration Manual, Page: 630 / 1743

Share
Download
Dell S6100 Configuration Manual Download Page 630

Version

Description

8.3.7.0

Introduced on the S4810.

7.6.1.0

Introduced on C-Series, E-Series, and S-Series

Related Commands

•

disable

 — globally disable GVRP.

show config

Display the global GVRP configuration.

Syntax

show config

Command Modes

CONFIGURATION-GVRP

Command History

This guide is platform-specific. For command information about other platforms, see the relevant 

Dell Networking 

OS Command Line Reference Guide

.

Version

Description

9.10(0.0)

Introduced on the S6100–ON.

9.8(1.0)

Introduced on the Z9100–ON.

9.8(0.0P5)

Introduced on the S4048-ON.

9.8(0.0P2)

Introduced on the S3048-ON.

9.7(0.0)

Introduced on the S6000–ON.

9.2(1.0)

Introduced on the Z9500.

9.0.2.0

Introduced on the S6000.

8.3.19.0

Introduced on the S4820T.

8.3.11.1

Introduced on the Z9000.

8.3.7.0

Introduced on the S4810.

7.6.1.0

Introduced on C-Series, E-Series, and S-Series

Related Commands

•

gvrp enable

 — enable GVRP on physical interfaces and LAGs.

•

protocol gvrp

 — access the GVRP protocol.

630

GARP VLAN Registration (GVRP)

Summary of Contents for S6100
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments