Dell S6100, Configuration Manual, Page: 1361 / 1743

Rapid Spanning Tree Protocol (RSTP)
The Dell Networking OS implementation of rapid spanning tree protocol (RSTP) is based on the IEEE 802.1w standard spanning-tree
protocol. The RSTP algorithm configures connectivity throughout a bridged local area network (LAN) that is comprised of LANs
interconnected by bridges.
Dell Networking OS supports RSTP.
Topics:
• bridge-priority
• debug spanning-tree rstp
• description
• disable
• forward-delay
• hello-time
• max-age
• protocol spanning-tree rstp
• show config
• show spanning-tree rstp
• spanning-tree rstp
• tc-flush-standard
bridge-priority
Set the bridge priority for RSTP.
Syntax bridge-priority priority-value
To return to the default value, use the
no bridge-priority
command.
Parameters
priority-value Enter a number as the bridge priority value in increments of 4096. The range is from 0 to
61440. The default is
32768 .
Defaults 32768
Command Modes CONFIGURATION RSTP (conf-rstp)
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100-ON.
45
Rapid Spanning Tree Protocol (RSTP) 1361