•
For a port channel interface, enter the keywords
port-channel
then a number.
•
For a VLAN interface, enter the keyword
vlan
then a number from 1 to 4094.
Defaults
None
Command Modes
EXEC
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.10(0.0)
Introduced on the S6100-ON.
9.8(1.0)
Introduced on the Z9100-ON.
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.2(1.0)
Introduced on the Z9500.
9.2.(0.0)
Added support for showing BFD status on the S4820T, S4810, and Z9000.
9.1.(0.0)
Added support for OSPFv3 on the S4810 and Z9000.
8.3.19.0
Introduced on the S4820T.
7.8.1.0
Added support for the C-Series.
7.4.1.0
Introduced on the E-Series.
Usage Information
If you enable BFD at the global level,
show ipv6 ospf interface
shows the BFD provisioning.
If you enable BFD at the interface level,
show ipv6 ospf interface
shows the BFD interval timers.
Example
Dell# show ipv6 ospf 3 interface tengigabitethernet 1/1/2/1
TenGigabitEthernet 1/1/2/1 is up, line protocol is up
Link Local Address fe80::201:e8ff:fe17:5bbd, Interface ID 67420217
Area 0, Process ID 1, Instance ID 0, Router ID 11.1.1.1
NetworkType BROADCAST, Cost: 1, Passive: No
Transmit Delay is 100 sec, State DR, Priority 1
Interface is using OSPF global mode BFD configuration.
Designated router on this network is 11.1.1.1 (local)
No backup designated router on this network
Timer intervals configured, Hello 10, Dead 40, Wait 1, Retransmit 5
Dell#
show ipv6 ospf neighbor
Display the OSPF neighbor information on a per-interface basis.
Syntax
show ipv6 ospf [
process-number
] [vrf
vrf-name
] neighbor [
interface
]
Open Shortest Path First (OSPFv2 and OSPFv3)
1183