manualshive.com logo in svg

Dell S6100, Configuration Manual, Page: 436 / 1743

Share
Download
Dell S6100 Configuration Manual Download Page 436

  Prefixes advertised 0, denied 0, withdrawn 0 from peer

  Connections established 1; dropped 0

  Last reset never

Local host: 172.16.0.1, Local port: 58145

Foreign host: 172.16.0.2, Foreign port: 179

Dell#

Related Commands

•

show ip bgp

 — view the current BGP routing table.

show ip bgp next-hop

View all next hops (using learned routes only) with current reachability and flap status. This command only displays one path, even if the 
next hop is reachable by multiple paths.

Syntax

show ip bgp [vrf 

vrf-name

] next-hop

Command Modes

•

EXEC

•

EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms, see the relevant 

Dell Networking 

OS Command Line Reference Guide

.

Version

Description

9.10(0.0)

Introduced on the S6100-ON.

9.8(1.0)

Introduced on the Z9100–ON.

9.8(0.0P5)

Introduced on the S4048-ON.

9.8(0.0P2)

Introduced on the S3048-ON.

9.2(1.0)

Introduced on the Z9500.

9.0.2.0

Introduced on the S6000.

8.3.19.0

Introduced on the S4820T.

8.3.11.1

Introduced on the Z9000.

8.3.7.0

Introduced on the S4810.

7.8.1.0

Introduced on the S-Series.

7.7.1.0

Introduced on the C-Series.

Usage Information

The following describes the 

show ip bgp next-hop

 command shown in the following example.

Field

Description

Next-hop

Displays the next-hop IP address.

Via

Displays the IP address and interface used to reach the next hop.

436

Border Gateway Protocol

Summary of Contents for S6100
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments