ip msdp default-peer
Define a default peer from which to accept all source-active (SA) messages.
Syntax
ip msdp default-peer
peer address
[list
name
]
To remove the default peer, use the
no ip msdp default-peer {
peer address
} list
name
command.
Parameters
peer address
Enter the peer address in a dotted decimal format (A.B.C.D.)
list
name
Enter the keywords
list name
and specify a standard access list that contains the RP
address that should be treated as the default peer. If no access list is specified, then all
SAs from the peer are accepted.
Defaults
Not configured.
Command Modes
CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.10(0.0)
Introduced on the S6100–ON.
9.8(1.0)
Introduced on the Z9100–ON.
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.7(0.0)
Introduced on the S6000-ON.
9.5(0.1)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.8.1.0
Added the
list
option and removed the
prefix-list
option.
7.4.1.0
Introduced
Usage Information
If a list is not specified, all SA messages received from the default peer are accepted. You can enter multiple
default peer
commands.
988
Multicast Source Discovery Protocol (MSDP)
