description
Add a description to this route map.
Syntax
description {
description
}
To remove the description, use the
no description {
description
}
command.
Parameters
description
Enter a description to identify the route map (80 characters maximum).
Defaults
None
Command Modes
ROUTE-MAP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.10(0.0)
Introduced on the S6100-ON.
9.8(1.0)
Introduced on the Z9100–ON.
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.7(0.0)
Introduced on the S6000–ON.
9.2(1.0)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
8.1.1.0
Introduced on the E-Series.
pre-7.7.1.0
Introduced.
Related Commands
•
— enable a route map.
match as-path
To match routes that have a certain AS number in their BGP path, configure a filter.
Syntax
match as-path
as-path-name
To delete a match AS path filter, use the
no match as-path
as-path-name
command.
Parameters
as-path-name
Enter the name of an established AS-PATH ACL, up to 140 characters.
Defaults
Not configured.
262
Access Control Lists (ACL)