show hardware system-flow
Display Layer 3 ACL or QoS data for the selected stack member and stack member port-pipe.
Syntax
show hardware system-flow stack-unit
id
port-set
number
[counters | pipeline
pipeline-number
]
Parameters
stack-unit
id
Enter the keywords
stack-unit
to select a stack member ID.
port-set
number
[counters | pipeline
pipeline-number
]
Enter the keywords
port-set
with a port-pipe number.
(OPTIONAL) Enter the keyword
counters
for the specified port-pipe.
Enter the keyword
pipeline
to display entries specific to a pipeline.
Defaults
None
Command Modes
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.10(0.0)
Introduced on the S6100-ON.
9.8(1.0)
Introduced on the Z9100–ON.
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.7(0.0)
Introduced on the S6000-ON.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.8.1.0
Introduced on the S-Series.
Example
Dell# show hardware system-flow stack-unit 1 port-set 0 counters
-------------------------------------------------------------------------------
EntryId Description #HITS for Pipeline: 0
-------------------------------------------------------------------------------
3067 STP BPDU Redirects 0
3065 LLDP BPDU Redirects 0
3063 LACP traffic Redirects 0
3062 GVRP traffic Redirects 0
3061 ARP Reply Redirects 0
3060 802.1x frames Redirects 0
3059 VRRP frames Redirects 0
3058 IPv6VRRP frames Redirects 0
3056 OSPFv3 Multicast [33:33:00:00:00:06] 0
3057 OSPFv3 Multicast [33:33:00:00:00:05] 0
3054 GRAT ARP 0
3053 ISIS L1, L2 traffic Redirects 0
3052 ISIS P2P IIH, EH
traffic Redirects 0
Example
Dell# show hardware system-flow stack-unit 1 port-set 0
############## FP Entry for redirecting STP BPDU to CPU Port ################
EID 0x00000bfb: gid=0x3c,
slice=5, slice_idx=0, part =1 prio=0xbfb, flags=0x10202, Installed, Enabled
tcam: color_indep=0,
DstMac
Part:0 Offset0: 48 Width0: 16
Part:0 Offset1: 64 Width1: 16
Part:0 Offset2: 80 Width2: 4
Debugging and Diagnostics
537
