manualshive.com logo in svg

Dell S6100, Configuration Manual, Page: 1463 / 1743

Share
Download
Dell S6100 Configuration Manual Download Page 1463

vlan-id 

vlan-id

Enter the keywords 

vlan-id

 then the VLAN to which the host belongs. The range is 

from 2 to 4094.

ip 

ip-address

Enter the keyword 

ip

 then the IP address that the server is leasing.

interface 

type

Enter the keyword 

interface

 then the type of interface to which the host is 

connected.

•

For a 10-Gigabit Ethernet interface, enter the keyword 

TenGigabitEthernet

 then 

the stack/slot/port/subport information.

•

For a 25-Gigabit Ethernet interface, enter the keyword 

twentyFiveGigE

 then the 

stack/slot/port/subport information.

•

For a 40-Gigabit Ethernet interface, enter the keyword 

fortyGigE

 then the stack/

slot/port[/subport] information.

•

For a 50-Gigabit Ethernet interface, enter the keyword 

fiftyGigE

 then the stack/

slot/port/subport information.

•

For a 100-Gigabit Ethernet interface, enter the keyword 

hundredGigE

 then the 

stack/slot/port information.

•

For a Loopback interface, enter the keyword 

loopback

 then a number from 0 to 

16383.

slot/port

Enter the slot and port number of the interface.

lease 

time

Enter the keyword 

lease

 then the amount of time the IP address is leased. The range is 

from 1 to 4294967295.

Defaults

none

Command Modes

•

EXEC

•

EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms, see the relevant 

Dell Networking 

OS Command Line Reference Guide

.

Version

Description

9.10(0.0)

Introduced on the S6100-ON.

9.8(1.0)

Introduced on the Z9100-ON.

9.8(0.0P5)

Introduced on the S4048-ON.

9.8(0.0P2)

Introduced on the S3048-ON.

9.7(0.0)

Introduced on the S6000–ON.

9.2(1.0)

Introduced on the Z9500.

9.0.2.0

Introduced on the S6000.

8.3.19.0

Introduced on the S4820T.

8.3.11.1

Introduced on the Z9000.

8.5.1.0

Added support for 4-port 40G line cards.

8.3.7.0

Introduced on the S4810.

7.8.1.0

Introduced on the C-Series and S-Series.

Security

1463

Summary of Contents for S6100
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments