redistribute ospf
Redistribute OSPF routes into BGP.
Syntax
redistribute ospf
process-id
[[match external {1 | 2}] [match internal]]
[route-map
map-name
]
To stop redistribution of OSPF routes, use the
no redistribute ospf
process-id
command.
Parameters
process-id
Enter the number of the OSPF process. The range is from 1 to 65535.
match external {1 |
2}
(OPTIONAL) Enter the keywords
match external
to redistribute OSPF external
routes. You can specify
1
or
2
to redistribute those routes only.
match internal
(OPTIONAL) Enter the keywords
match internal
to redistribute OSPF internal routes
only.
route-map
map-
name
(OPTIONAL) Enter the keywords
route-map
then the name of a configured route map.
Defaults
Not configured.
Command Modes
ROUTER BGP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.10(0.0)
Introduced on the S6100-ON.
9.8(1.0)
Introduced on the Z9100–ON.
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.7(0.0)
Introduced on the S6000–ON.
9.2(1.0)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
8.3.1.0
Introduced the ability to substitute IGP cost for MED when a peer/peer-group outbound
route-map is set as
internal
.
7.8.1.0
Introduced on the S-Series.
7.7.1.0
Introduced on the C-Series.
Border Gateway Protocol
409