device–role
Specify the role of the device attached to the port.
Syntax
device-role {host | router}
To reset the device role, use the
no device-role {host | router}
command.
Parameters
host
Enter the keyword
host
to set the device-role as host.
router
Enter the keyword
router
to set the device-role as router.
Defaults
None
Command Modes
POLICY LIST CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.11(0.0)
Introduced on the C9010.
9.10(0.0)
Introduced on the S6100-ON.
9.9(0.0)
Introduced on the Z9500.
9.8(1.0)
Introduced on the Z9100-ON.
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.7(0.0)
Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9000 switches.
Related Commands
•
ipv6 nd raguard policy policy-name
— define the RA guard policy name and enter the RA guard policy
configuration mode.
•
— configure the RA guard related commands.
hop–limit
Enable the verification of the advertised hop count limit. If this command is not configured, the verification process is bypassed.
Syntax
hop-limit {maximum | minimum
limit
}
To reset the hop count limit, use the
no hop-limit {maximum | minimum
limit
}
command.
Parameters
maximum
limit
Enter the keyword
maximum
then the hop limit value. The range is from 0 to 254.
minimum
limit
Enter the keyword
minimum
then the hop limit value. The range is from 0 to 254.
Defaults
None
Command Modes
POLICY LIST CONFIGURATION
1030
Neighbor Discovery Protocol (NDP)
