Version
Description
9.10(0.0)
Introduced on the S6100-ON.
9.8(1.0)
Introduced on the Z9100–ON.
9.0.2.0
Introduced on the S6000.
9.0(0.0)
Added support for IPv6 for the
file-url
parameter.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000. Added support for the SSD on the Z9000 only.
8.3.7.0
Introduced on the S4810.
7.7.1.0
Added support for TFTP and SCP.
7.6.1.0
Introduced on the S-Series.
Usage Information
You must reload Dell Networking OS after executing this command.
Example
Dell#upgrade boot ?
all Upgrade both boot flash image and selector image
bootflash-image Upgrade boot flash image
bootselector-image Upgrade boot selector image
Dell#
verify
Validate the software image on the flash drive after the image has been transferred to the system, but before the image has been installed.
Syntax
verify
{
md5
|
sha256
}[
flash
:// ]
img-file
[
hash-value
]
Parameters
md5
Enter the
md5
keyword to use the MD5 message-digest algorithm.
sha256
Enter the
sha256
keyword to use the SHA256 Secure Hash Algorithm
flash://
(Optional). Enter the
flash://
keyword. The default is to use the flash drive. You can
just enter the image file name.
img-file
Enter the name the Dell Networking software image file to validate.
hash-value
(Optional). Enter the relevant hash published on i-Support.
Defaults
flash drive
Command Modes
EXEC mode
Command History
Version 9.5.(0.0)
Version
Description
9.10(0.0)
Introduced on the S6100-ON.
9.8(1.0)
Introduced on the Z9100–ON.
9.5(0.0)
Introduced on the Z9000, S6000, S4820T, S4810, and MXL.
File Management
83
