key-encryption-
type
(OPTIONAL) Specifies if the key is encrypted.
Valid values: 0 (key is not encrypted) or 7 (key is encrypted).
key
Text string used in authentication.
The required lengths of a non-encrypted or encrypted key are:
3DES - 48 or 96 hex digits; DES - 16 or 32 hex digits; AES-CBC -32 or 64 hex digits for
AES-128 and 48 or 96 hex digits for AES-192.
authentication-
algorithm
Specifies the authentication algorithm to use for encryption. Valid values are
MD5
or
SHA1
.
key-encryption-
type
(OPTIONAL) Specifies if the authentication key is encrypted.
Valid values: 0 (key is not encrypted) or 7 (key is encrypted).
key
Text string used in authentication.
For MD5 authentication, the key must be 32 hex digits (non-encrypted) or 64 hex digits
(encrypted).
For SHA-1 authentication, the key must be 40 hex digits (non-encrypted) or 80 hex digits
(encrypted).
Defaults
Not configured.
Command Modes
INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.10(0.0)
Introduced on the S6100-ON.
9.8(1.0)
Introduced on the Z9100-ON.
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.2(1.0)
Introduced on the Z9500.
9.1.(0.0)
Introduced on the S4810 and Z9000.
8.4.2.0
Introduced on the E-Series.
8.3.19.0
Introduced on the S4820T.
Usage Information
Before you enable IPsec encryption on an OSPFv3 interface, first enable IPv6 unicast routing globally, configure an
IPv6 address and enable OSPFv3 on the interface, and assign the interface to an area.
An SPI value must be unique to one IPsec security policy (authentication or encryption) on the router. Configure
the same encryption policy (same SPI and key) on each OSPFv3 interface in a link.
Open Shortest Path First (OSPFv2 and OSPFv3)
1165