Output
Description
number
changes,
last change
time
Number of times that the state of the tracked object has changed and the time since the
last change in
hours:minutes:seconds
.
First hop interface
Displays the type and slot/port number of the first-hop interface of the tracked route.
Tracked by
Client that is tracking an object’s state; for example, VRRP.
Example
Dell# show track
Track 1
IP route 23.0.0.0/8 reachability
Reachability is Down (route not in route table)
2 changes, last change 00:16:08
Tracked by:
Track 2
IPv6 route 2040::/64 metric threshold
Metric threshold is Up (STATIC/0/0)
5 changes, last change 00:02:16
Metric threshold down 255 up 254
First-hop interface is TenGigabitEthernet 1/1/2/1
Tracked by:
VRRP TenGigabitEthernet 1/1/3/4 IPv6 VRID 1
Track 3
IPv6 route 2050::/64 reachability
Reachability is Up (STATIC)
5 changes, last change 00:02:16
First-hop interface is TenGigabitEthernet 1/1/2/1
Tracked by:
VRRP TenGigabitEthernet 1/1/3/4 IPv6 VRID 1
Usage Information
The following describes the
show track brief
command shown in the Example below.
Output
Description
ResID
Number of the tracked object.
Resource
Type of tracked object.
Parameter
Detailed description of the tracked object.
State
Up or Down state of the tracked object.
Last Change
Time since the last change in the state of the tracked object.
Example (Brief)
Dell> show track brief
ResId Resource Parameter State LastChange
1 IP route reachability 10.16.0.0/16 Up 00:01:08
2 Interface line-protocol Ethernet0/2 Down 00:05:00
3 Interface ip routing VLAN100 Up 01:10:05
Related Commands
•
– display configuration information about tracked objects.
•
– configure object tracking on the routing status of an IPv4 Layer 3 interface.
•
– configure object tracking on the line-protocol state of a Layer 2 interface.
•
track ip route metric threshold
– configure object tracking on the threshold of an IPv4 route metric.
•
– configure object tracking on the reachability of an IPv4 route.
Object Tracking
1051
