cam-acl
Allocate content addressable memory (CAM) for IPv4 and IPv6 ACLs.
Syntax
cam-acl {default | l2acl
number
ipv4acl
number
ipv6acl
number
ipv4qos
number
l2qos
number
l2pt
number
ipmacacl
number
[vman-qos | vman-dual-qos]
number
{fcoeacl
number
} {openflow {4|8}}
Parameters
default
Use the default CAM profile settings and set the CAM as follows:
•
L2Acl : 2
•
Ipv4Acl : 2
•
Ipv6Acl : 0
•
Ipv4Qos : 2
•
L2Qos : 2
•
L2PT : 0
•
IpMacAcl : 1
•
VmanQos : 0
•
EtsAcl : 0
•
FcoeAcl : 0
•
iscsiOptAcl : 0
•
ipv4pbr : 0
•
vrfv4Acl : 0
•
Openflow : 0
•
fedgovacl : 0
•
nlbclusteracl: 0
Allocate space to each CAM region.
Enter the CAM profile name then the amount of CAM space to be allotted. The total
space allocated must equal to 9. The ipv6acl range must be a factor of 3.
Enter
4
or
8
for the number of OpenFlow FP blocks.
•
4
: Creates 242 entries for use by the OpenFlow controller (256 total entries minus the
14 entries reserved for internal functionality)
•
8
: Creates 498 entries for use by the OpenFlow controller (512 total entries minus the
14 entries reserved for internal functionality)
Command Modes
CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.10(0.0)
Introduced on the S6100-ON.
9.8(2.0)
Introduced on the S3100 series.
9.8(1.0)
Introduced on the Z9100–ON.
Control and Monitoring
89
