Dell S6100, Configuration Manual

Page: 722 / 1743

• show ip interface — display Layer 3 information about the interfaces.
shutdown
Disable an interface.
Syntax shutdown
To activate an interface, use the
no shutdown
command.
Defaults The interface is disabled.
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series legacy
command
Usage Information
The
shutdown
command marks a physical interface as unavailable for traffic. To discover if an interface is
disabled, use the
show ip interface brief
command. Disabled interfaces are listed as down.
Disabling a VLAN or a port channel causes different behavior. When a VLAN is disabled, the Layer 3 functions
within that VLAN are disabled. Layer 2 traffic continues to flow. Entering the
shutdown
command on a port
channel disables all traffic on the port channel and the individual interfaces within the port channel. To enable a
port channel, enter
no shutdown
on the port channel interface and at least one interface within that port
channel.
The
shutdown
and
description
commands are the only commands that you can configure on an interface
that is a member of a port channel.
Related Commands
• interface port-channel — create a port channel interface.
• interface vlan — create a VLAN.
722 Interfaces