Dell S6100, Configuration Manual

Page: 95 / 1743

Version Description
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage Information Users entering EXEC Privilege mode or any other configured privilege level can access configuration commands. To
protect against unauthorized access, use the
enable password
command to configure a password for the
enable
command at a specific privilege level. If no privilege level is specified, the default is privilege level 15 .
NOTE: If you are authorized for the EXEC Privilege mode by your role, you do not need to enter an
enable password.
Related Commands
• enable password — configures a password for the
enable
command and to access a privilege level.
enable cpu-clock-monitor
Enables Intel CPU LPC (Low Pin Count) clock-failure monitoring.
Syntax enable cpu-clock-monitor
To disable this feature, use the
no enable cpu-clock-monitor
command.
Parameters None
Defaults Enabled
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.11(2.0P1) Introduced on the C9010, S3048–ON, S6100–ON and Z9100–ON.
Usage Information Enables Intel CPU LPC (Low Pin Count) clock-failure monitoring and issues a warning syslog to the user to take
appropriate action if signal degradation is seen.
enable optic-info-update interval
Enable polling intervals of optical information updates for simple network management protocol (SNMP).
Syntax enable optic-info-update [interval seconds ]
To disable optical power information updates, use the
no enable optic-info-update interval
command.
Parameters
interval seconds Enter the keyword
interval
then the polling interval in seconds. The range is from 120
to 6000 seconds. The default is 300 seconds (5 minutes).
Control and Monitoring 95