manualshive.com logo in svg

Dell S6100, Configuration Manual, Page: 676 / 1743

Share
Download
Dell S6100 Configuration Manual Download Page 676

Related Commands

•

interface loopback

 — configure a Loopback interface.

•

interface null

 — configure a Null interface.

•

interface port-channel

 — configure a port channel.

•

interface vlan

 — configure a VLAN.

interface group

Create or delete group of VLANs with a single command. You can also use this command to apply a set of configurations on a group of 
interfaces.

Syntax

interface group [

interface

 | vlan 

vlanid

 {- 

vlanid

 } ]

To delete a range of VLANs, use the following command:

no interface group vlan 

vlanid

 {

- vlanid

}

Parameters

interface, 
interface,...

Enter the keywords 

interface group

 and one of the interfaces — slot/port or VLAN 

number. Select the range of interfaces for bulk configuration. Spaces are not required 
between the commas. Comma-separated ranges can include VLANs and physical 
interfaces.

Enter the member VLANs using VLAN IDs (separated by commas), a range of VLAN IDs 
(separated by a hyphen), a single VLAN ID, or a combination. For example: VLAN IDs 
(comma-separated): 3, 4, 6. Range (hyphen-separated): 5-10.

Slot/Port information need not contain a space before and after the dash. For example, 
both of the following commands are valid: 

interface group 

tengigabitethernet 1/1/1/1 - 1/1/1/4; interface group 
tengigabitethernet 1/1/1/1–1/1/1/4

.

•

For a 10-Gigabit Ethernet interface, enter the keyword 

TenGigabitEthernet

 then 

the stack/slot/port/subport information.

•

For a 25-Gigabit Ethernet interface, enter the keyword 

twentyFiveGigE

 then the 

stack/slot/port/subport information.

•

For a 40-Gigabit Ethernet interface, enter the keyword 

fortyGigE

 then the stack/

slot/port[/subport] information.

•

For a 50-Gigabit Ethernet interface, enter the keyword 

fiftyGigE

 then the stack/

slot/port/subport information.

•

For a 100-Gigabit Ethernet interface, enter the keyword 

hundredGigE

 then the 

stack/slot/port information.

•

For a VLAN interface, enter the keyword 

vlan

 then a number from 1 to 4094.

Command Modes

CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms, see the relevant 

Dell Networking 

OS Command Line Reference Guide

.

676

Interfaces

Summary of Contents for S6100
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments