Version
Description
7.7.1.0
Introduced on the C-Series.
Usage Information
In the Dell Networking OS best path selection process, the path with the highest weight value is preferred.
NOTE:
In the Dell Networking OS best-path selection process, the path with the highest weight value is
preferred.
If you configure the
set weight
command in a route map applied to this neighbor, the weight set in that
command overrides the weight set in the
neighbor weight
command.
Related Commands
•
— assign a weight to all paths meeting the route map criteria.
network
Specify the networks for the BGP process and enter them in the BGP routing table.
Syntax
network
ip-address mask
[route-map
map-name
]
To remove a network, use the
no network
ip-address mask
[route-map
map-name
]
command.
Parameters
ip-address
Enter an IP address in dotted decimal format of the network.
mask
Enter the mask of the IP address in the slash prefix length format (for example, /24).
The mask appears in command outputs in dotted decimal format (A.B.C.D).
route-map
map-
name
(OPTIONAL) Enter the keyword
route-map
then the name of an established route map.
Only the following ROUTE-MAP mode commands are supported:
•
•
•
•
•
•
•
If the route map is not configured, the default is
deny
(to drop all routes).
Defaults
Not configured.
Command Modes
ROUTER BGP
404
Border Gateway Protocol
