Version
Description
8.4.1.0
Added the
multi-auth
option on the C-Series and S-Series.
8.3.2.0
Added the
single-host
and
multi-host
options on the C-Series, E-Series, and S-
Series.
Usage Information
•
Single-host mode authenticates only one host per authenticator port and drops all other traffic on the port.
•
Multi-host mode authenticates the first host to respond to an Identity Request and then permits all other
traffic on the port.
•
Multi-supplicant mode authenticates every device attempting to connect to the network on the authenticator
port.
Related Commands
•
— display the 802.1X configuration of an interface.
mac
Configure a list of supplicant MAC addresses for dot1x profile represented with a profile-name.
Syntax
[no] mac {
mac-address1
mac-address2
…
mac-address6
}
Parameters
mac-address1
mac-
address2
…
mac-
address6
Enter the keyword
mac
and type the 48– bit MAC addresses using the H.H.H format. A
maximum of 6 MAC addresses are allowed.
Defaults
None
Command Modes
DOT1X PROFILE CONFIG (conf-dot1x-profile)
CONFIGURATION TERMINAL BATCH
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant
Dell
Networking OS Command Line Reference Guide
.
Version
Description
9.10(0.0)
Introduced on the S3100 series, S4048–ON, S4048–ON, S4810, S4820T, S5000, S6000,
S6000–ON, S6100–ON, the Configuration Terminal Batch mode on C9010, Z9100–ON,
and Z9500.
9.9(0.0)
Introduced on the C9010.
Usage Information
The
mac
command configures a list of supplicant MAC addresses for a dot1x profile represented with a profile-
name. You can configure up to 6 MAC addresses in a single
mac
command. The maximum number of MAC
addresses that you can configure in a single profile is limited to 100.
Use this command in Configuration Terminal Batch mode to configure a list of supplicant MAC addresses for dot1x
profile in a dual-homing setup.
Example
Dell(conf)#dot1x profile mySupplicants
Dell(conf-dot1x-profile)#mac 00:50:56:AA:01:10 00:50:56:AA:01:11
802.1X
163
