Field
Description
Name servers are...
Lists the name servers, if configured.
Host
Displays the host name assigned to the IP address.
Flags
Classifies the entry as one of the following:
•
perm — the entry was manually configured and will not time out
•
temp — the entry was learned and will time out after 72 hours of inactivity.
Also included in the flag is an indication of the validity of the route:
•
ok — the entry is valid.
•
ex — the entry expired.
•
?? — the entry is suspect.
TTL
Displays the amount of time until the entry ages out of the cache. For dynamically learned
entries only.
Type
Displays IP as the type of entry.
Address
Displays the IP addresses assigned to the host.
Example
Dell# show hosts
Default domain is not set
Name/address lookup uses static mappings
Name servers are not set
Host Flags TTL Type Address
-------- ----- ---- ---- -------
ks (perm, OK) - IP 2.2.2.2
4200-1 (perm, OK) - IP 192.68.69.2
1230-3 (perm, OK) - IP 192.68.99.2
ZZr (perm, OK) - IP 192.71.18.2
Z10-3 (perm, OK) - IP 192.71.23.1
Dell#
Related Commands
•
— view the DNS resolution.
•
— configure a host.
show ip cam stack-unit
Display CAM entries for a port-pipe of a stack-unit on a S-Series or Z-Series switch.
Syntax
show ip cam stack-unit {
stack-unit-number
} [port-set {
pipe-number
} | vrf
vrf-
name
{
ip-address mask
[longer-prefixes [ecmp-group detail]]}| ecmp-group
{detail | member-info [detail [group-index
index-number
]]}| summary]
Parameters
stack-unit-number
Enter the stack-unit ID. The unit ID range is from 1 to 6.
port-set
pipe-
number
Enter the keyword
port-set
then the number of the stack unit’s port-pipe.
vrf
vrf-name
Enter the keyword
vrf
followed by the name of the VRF to display CAM entries
corresponding to that VRF.
network mask
[longer-prefixes
(OPTIONAL) Enter the IP address and mask of a route to CAM entries for that route only.
You can enter one of the following keywords to filter results.
IPv4 Routing
789
