NOTE:
The :: notation specifies successive hexadecimal fields of zeros.
NOTE:
To use the IPv6 address, the Open Automation package should also
support IPv6 communications. For this purpose, SupportAssist requires Dell
Networking Open Automation 9.10(0.0) package or later.
port
port-number
Enter the keyword
port
then the TCP/IP port number. The port number range is from
1024 to 65534.
username
userid
(OPTIONAL) Enter the keyword
username
then the user ID used for the proxy server.
password
Enter the keyword
password
then the encryption-type or the user password.
encryption-type
(OPTIONAL) Enter an encryption type for the
password
you enter.
•
0 directs the system to interpret the password as clear text.
•
7 indicates that the password is encrypted using a DES hashing algorithm.
password
Enter a string up to 32 characters long.
Defaults
encryption-type for the password is 0.
Command Modes
SUPPORTASSIST SERVER
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.11(0.0)
Introduced on the M I/O Aggregator and FN IOM.
9.10(0.0)
Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0)
Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000, S6000–ON,
Z9500, MXL.
Usage Information
The passwords are stored encrypted in the running configuration.
enable
Enable communication with the SupportAssist server.
Syntax
enable
To disable communication to a specific SupportAssist server, use the
no enable
command.
Defaults
Enabled
Command Modes
SUPPORTASSIST SERVER
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.11(0.0)
Introduced on the M I/O Aggregator and FN IOM.
9.10(0.0)
Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
1594
SupportAssist