Version
Description
9.10(0.0)
Introduced on the S6100-ON.
9.8(1.0)
Introduced on the Z9100-ON.
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
pre- 6.2.1.1
Introduced on the E-Series.
redistribute ospf
Redistribute routing information from an OSPF process.
Syntax
redistribute ospf
process-id
[match external {1 | 2} | match internal | metric
metric-value
] [route-map
map-name
]
To disable redistribution, use the
no redistribute ospf
process-id
[match external {1 | 2} |
match internal | metric
metric-value
] [route-map
map-name
]
command.
Parameters
process-id
Enter a number that corresponds to the OSPF process ID to redistribute. The range is
from 1 to 65355.
match external {1 |
2}
(OPTIONAL) Enter the keywords
match external
then the numbers
1
or
2
to
indicated that external 1 routes or external 2 routes should be redistributed.
match internal
(OPTIONAL) Enter the keywords
match internal
to indicate that internal routes
should be redistributed.
metric
metric-value
(OPTIONAL) Enter the keyword
metric
then a number as the metric value. The range is
from 0 to 16.
route-map
map-
name
(OPTIONAL) Enter the keywords
route-map
then the name of a configured route map.
Defaults
Not configured.
Command Modes
ROUTER RIP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.10(0.0)
Introduced on the S6100-ON.
1338
Routing Information Protocol (RIP)
