•
For a 50-Gigabit Ethernet interface, enter the keyword
fiftyGigE
then the stack/
slot/port/subport information.
•
For a 100-Gigabit Ethernet interface, enter the keyword
hundredGigE
then the
stack/slot/port information.
•
For a Port Channel interface, enter the keywords
port-channel
then a number.
•
For a VLAN, enter the keyword
vlan
then a number from 1 to 4094.
connected
(OPTIONAL) Enter the keyword
connected
to filter only directly connected routes.
isis
(OPTIONAL) Enter the keyword
isis
to filter only IS-IS routes.
ospf
(OPTIONAL) Enter the keyword
ospf
to filter all OSPF routes.
static
(OPTIONAL) Enter the keyword
static
to filter manually configured routes.
Defaults
Not configured.
Command Modes
ROUTER RIP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.10(0.0)
Introduced on the S6100-ON.
9.8(1.0)
Introduced on the Z9100-ON.
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.7(0.0)
Introduced on the S6000-ON.
9.2(1.0)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.5.1.0
Added support for 4-port 40G line cards on the E-Series.
8.3.7.0
Introduced on the S4810.
7.8.1.0
Introduced on the S-Series.
7.6.1.0
Introduced on the C-Series.
pre- 6.2.1.1
Introduced on the E-Series.
Related Commands
•
— enters PREFIX-LIST mode and configures a prefix list.
Routing Information Protocol (RIP)
1325