Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.10(0.0)
Introduced on the S6100-ON.
9.8(1.0)
Introduced on the Z9100–ON.
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.7(0.0)
Introduced on the S6000–ON.
9.2(1.0)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
8.1.1.0
Introduced on the E-Series.
pre-6.1.1.0
Introduced on the E-Series.
match route-type
To match routes based on the how the route is defined, configure a filter.
Syntax
match route-type {external [type-1 | type-2] | internal | level-1 | level-2 |
local}
To delete a match, use the
no match route-type {local | internal | external [type-1 |
type-2] | level-1 | level-2}
command.
Parameters
external [type-1|
type-2]
Enter the keyword
external
then either type-1 or type-2 to match only on OSPF Type 1
routes or OSPF Type 2 routes.
internal
Enter the keyword
internal
to match only on routes generated within OSPF areas.
level-1
Enter the keyword
level-1
to match IS-IS Level 1 routes.
level-2
Enter the keyword
level-2
to match IS-IS Level 2 routes.
local
Enter the keyword
local
to match only on routes generated within the switch.
Defaults
Not configured.
Command Modes
ROUTE-MAP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.10(0.0)
Introduced on the S6100-ON.
270
Access Control Lists (ACL)
