Dell S6100, Configuration Manual

Page: 963 / 1743

Version Description
7.6.1.0 Introduced on the C-Series.
7.4.1.0 Introduced on the E-Series.
mode
To receive or transmit, set LLDP.
Syntax mode {tx | rx}
To return to the default, use the
no mode
command.
Parameters
tx Enter the keyword
tx
to set the mode to transmit.
rx Enter the keyword
rx
to set the mode to receive.
Defaults Both transmit and receive .
Command Modes CONFIGURATION (conf-lldp) and INTERFACE (conf-if- interface -lldp)
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Introduced on the S-Series.
7.6.1.0 Introduced on the C-Series.
7.4.1.0 Introduced on the E-Series.
Related Commands
• protocol lldp (Configuration) — enable LLDP globally.
• show lldp neighbors — display the LLDP neighbors.
Link Layer Discovery Protocol (LLDP) 963