Dell S6100, Configuration Manual

Page: 135 / 1743

PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
0x00000000 45040 4504 10000 13.12% 13.20% 12.94% 0 system
0x000001ac 25750 2575 10000 2.78% 2.48% 3.40% 0 sysdlp
0x0000019a 10650 1065 10000 0.60% 1.16% 2.50% 0 sysd
0x000003a5 860 86 10000 0.40% 0.22% 0.28% 0 clish
0x000001ad 520 52 10000 0.20% 0.30% 0.16% 0 lacp
0x000004ba 330 33 10000 0.20% 0.36% 0.09% 0 clish
0x000000c9 1240 124 10000 0.20% 0.15% 0.44% 0 nvmgr
0x000000e0 530 53 10000 0.20% 0.12% 0.16% 0 igmp
0x00000132 420 42 10000 0.20% 0.10% 0.13% 0 vrrp
0x0000028d 410 41 10000 0.20% 0.05% 0.12% 0 ovsdbsvr
0x000000a9 200 20 10000 0.20% 0.03% 0.06% 0 arpm
0x00000253 100 10 10000 0.20% 0.02% 0.02% 0 otm
0x00000206 140 14 10000 0.20% 0.02% 0.03% 0 tnlmgr
0x00000012 1290 129 10000 0.00% 0.10% 0.12% 0 mount_mfs
0x0000024d 40 40 10000 0.00% 0.08% 0.14% 0 xstp
Dell#
Related Commands
• show hardware layer2 acl — displays Layer 2 ACL data for the selected stack member and stack member port-
pipe.
• show hardware layer3 — displays Layer 3 ACL or QoS data for the selected stack member and stack member
port-pipe.
• show hardware stack-unit — displays the data plane or management plane input and output statistics of the
designated component of the designated stack member.
• show hardware system-flow — displays Layer 3 ACL or QoS data for the selected stack member and stack
member port-pipe.
• show interfaces stack-unit — displays information on all interfaces on a specific S-Series stack member.
• show processes memory (S-Series) — displays CPU usage information based on processes running in an S-
Series.
show processes ipc flow-control
Display the single window protocol queue (SWPQ) statistics.
Syntax show processes ipc flow-control [cp]
Parameters
cp (OPTIONAL) Enter the keyword
cp
to view the control processor’s SWPQ statistics.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
Control and Monitoring 135