manualshive.com logo in svg

Dell S6100, Configuration Manual, Page: 1422 / 1743

Share
Download
Dell S6100 Configuration Manual Download Page 1422

interface

Enter the following keywords and slot/port or number information:

•

For a 10-Gigabit Ethernet interface, enter the keyword 

TenGigabitEthernet

 then 

the stack/slot/port/subport information.

•

For a 25-Gigabit Ethernet interface, enter the keyword 

twentyFiveGigE

 then the 

stack/slot/port/subport information.

•

For a 40-Gigabit Ethernet interface, enter the keyword 

fortyGigE

 then the stack/

slot/port[/subport] information.

•

For a 50-Gigabit Ethernet interface, enter the keyword 

fiftyGigE

 then the stack/

slot/port/subport information.

•

For a 100-Gigabit Ethernet interface, enter the keyword 

hundredGigE

 then the 

stack/slot/port information.

•

For a Loopback interface, enter the keyword 

loopback

 then a number from 0 to 

16383.

•

For a port channel interface, enter the keywords 

port-channel

 then a number.

•

For a Null interface, enter the keyword null then the Null interface number.

•

For a VLAN interface, enter the keyword 

vlan

 then a number from 1 to 4094.

Defaults

Not configured.

Command Modes

TACACS SERVER GROUP

Command History

This guide is platform-specific. For command information about other platforms, see the relevant 

Dell Networking 

OS Command Line Reference Guide

.

Version

Description

9.10(0.0)

Introduced on the S6100-ON.

9.8(1.0)

Introduced on the Z9100-ON.

9.8(0.0P5)

Introduced on the S4048-ON.

9.8(0.0P2)

Introduced on the S3048-ON.

9.7(0.0)

Introduced on the S6000–ON.

9.4.(0.0)

Introduced on the S-Series and Z-Series.

Usage Information

You can use this command to associate a group of TACACS servers with a VRF and source interface. You can 
configure the source interface only with the VRF attribute and source interface is optional with the VRF attributes.

If VRF is not configured on the TACACS group, then the group is considered to be on the default VRF.

RADIUS groups and VRFs have one-to-one mapping. If a VRF is configured with one RADIUS group, then you 
cannot use the same VRF with another RADIUS group. When the VRF is removed, then the corresponding 
RADIUS group is also removed automatically.

Example

1422

Security

Summary of Contents for S6100
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments