NOTE:
This command also enables you to view information corresponding to a
range of ports. However, for Open Networking (ON) platforms the notation
for specifying port range in the command is different from how you specify in
non-ON platforms.
•
For non-ON platforms, you can specify multiple ports as
slot/port-range
. For
example, if you want to display information corresponding to all ports between 1 and 4,
specify the port range as
show interfaces
interface-type
1/1 - 4
.
•
For ON platforms, you can specify multiple ports as
slot/port/[subport] -
slot/port/[subport]
. For example, if you want to display information
corresponding to all ports between 1 and 4, specify the port range as
show
interfaces
interface-type
1/1/1 - 1/1/4
.
Command Modes
•
EXEC
•
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.11(0.0)
Added support to display 10GBASE-T information on the S4048, S4048T, S6000, S6000-
ON, S6100, Z9500, S6010, and Z9100.
9.10(0.1)
Introduced on the S6010-ON and S4048T-ON.
9.10(0.0)
Introduced on the S3148.
9.10(0.0)
Introduced on the S6100–ON.
9.9(0.0)
Added support to display the interface configurations corresponding to a range of ports.
9.8(2.0)
Introduced on the S3100 series.
9.8(1.0)
Introduced on the Z9100–ON.
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.7(0.0)
Introduced on the S6000-ON.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
8.5.1.0
Added support for 4-port 40G line cards on the E-Series.
8.1.1.0
Introduced on the E-Series.
7.8.1.0
Output augmented with diagnostic data for pluggable media.
7.7.1.0
Removed three fields in the output: Vendor Name, Vendor OUI, and Vendor PN.
7.6.1.0
Introduced on the C-Series and S-Series.
6.5.4.0
Introduced on the E-Series.
716
Interfaces
