Dell S6100, Configuration Manual

Page: 790 / 1743

[ecmp-group
detail]]
• Enter the keyword
longer-prefixes
to view routes with a common prefix.
• Enter the keyword
ecmp-group detail
to view the ECMP group index.
ecmp-group {detail
| member-info
[detail [group-index
index-number ]]}
(OPTIONAL) Enter the keyword
ecmp-group
then one of the following keywords to
filter results.
• Enter the keyword
detail
to view the ECMP group index.
• Enter the keyword
member-info
to view the member information for the ECMP
group.
• Enter the keyword
member-info detail
to view detailed ECMP membership and
n-hop information.
• Enter the keyword
group-index
then the index number to show ECMP
membership per group. The range is from 0 to 1022.
summary (OPTIONAL) Enter the keyword summary to view a table listing route prefixes and the
total number routes which can be entered in to CAM.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Added support for VRF.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Added support for up to seven stack members.
7.6.1.0 Introduced on the S-Series.
Usage Information The following describes the
show ip cam
command shown in the following example.
Field Description
Destination Displays the destination route of the index.
EC Displays 1 if the route is an ECMP route. Else, displays 0.
C This is the CPU bit. If it displays 1, then it indicates that a packet hitting this entry will be
forwarded to the CPU.
V Id Displays the VLAN ID. If the entry is 0, the entry is not part of a VLAN.
790 IPv4 Routing