Version
Description
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.7(0.0)
Introduced on the S6000-ON.
9.0.2.0
Introduced on the S6000.
9.2(0.2)
Added support for the
fcoe
parameter on the S4810 and S4820T.
9.1.(0.0)
Added support for OpenFlow on the Z9000.
8.3.19.0
Introduced on the S4820T.
8.3.12.0
Added the keywords
fcoeacl
and
iscsioptacl
on the S4810.
8.3.11.1
Introduced on the Z9000.
8.3.1.0
Added the keywords
ecfmacl
,
vman-qos
, and
vman-dual-qos
.
8.2.1.0
Introduced on the S-Series.
7.8.1.0
Introduced on the C-Series.
Usage Information
For the new settings to take effect, save the new CAM settings to the startup-config (
write-mem
or
copy run
start
) then reload the system.
The total amount of space allowed is 16 FP Blocks. System flow requires three blocks and these blocks cannot be
reallocated. The
ipv4acl
profile range is from 0 to 8.
When configuring space for IPv6 ACLs, the total number of Blocks must equal 9.
The
ipv6acl
allocation must be a factor of 3 (0,3,6,9).
If you enabled BMP, to perform a reload on the chassis to upgrade any configuration changes that have changed
the NVRAM content, use the
reload conditional nvram-cfg-change
command.
clear line
Reset a terminal line.
Syntax
clear line {
line-number
| console 0 |
vty number
}
Parameters
line-number
Enter a number for one of the 12 terminal lines on the system. The range is from 0 to 11.
console 0
Enter the keywords
console 0
to reset the console port.
vty number
Enter the keyword
vty
then a number to clear a terminal line. The range is from 0 to 9.
Command Modes
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.10(0.0)
Introduced on the S6100-ON.
90
Control and Monitoring
