Sent: 21 requests, 10 replies (0 proxy)
Routing Processor1 IP Traffic:
show tcp statistics
View information on TCP traffic through the switch.
Syntax
show tcp statistics {all | cp}
Parameters
all
Enter the keyword all to view
all
TCP information.
cp
Enter the keyword
cp
to view only TCP information from the Control Processor.
Command Modes
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.10(0.0)
Introduced on the S6100–ON.
9.8(1.0)
Introduced on the Z9100–ON.
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.2(1.0)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
8.1.1.0
Introduced on the E-Series.
6.4.1.0
Introduced
Usage Information
The following describes the
show tcp statistics cp
command shown in the following example.
Field
Description
Rcvd:
Displays the number and types of TCP packets received by the switch.
•
Total = total packets received
•
no port = number of packets received with no designated port
0 checksum error...
Displays the number of packets received with the following:
•
checksum errors
•
bad offset to data
810
IPv4 Routing
