Dell S6100, Configuration Manual

Page: 433 / 1743

{received-routes [ network [ network-mask ]]} | {denied-routes [ network [ network-
mask ]]}]
Parameters
ipv4 multicast (OPTIONAL) Enter the keyword
ipv4
followed by the keyword
multicast
to view
information related only to ipv4 multicast routes.
ipv4 unicast (OPTIONAL) Enter the keyword ipv4 followed by the keyword unicast to view
information related only to ipv4 unicast routes.
ipv6 unicast (OPTIONAL) Enter the keyword
ipv6
followed by the keyword
unicast
to view
information related only to ipv6 unicast routes.
ip-address (OPTIONAL) Enter the IP address of the neighbor to view only BGP information
exchanged with that neighbor.
advertised-routes (OPTIONAL) Enter the keywords
advertised-routes
to view only the routes the
neighbor sent.
dampened-routes (OPTIONAL) Enter the keywords
dampened-routes
to view information on dampened
routes from the BGP neighbor.
detail (OPTIONAL) Enter the keyword
detail
to view neighbor-specific internal information
for the IPv4 Unicast address family.
flap-statistics (OPTIONAL) Enter the keywords
flap-statistics
to view flap statistics on the
neighbor’s routes.
routes (OPTIONAL) Enter the keyword
routes
to view only the neighbor’s feasible routes.
received-routes
[
network [ network-
mask ]
(OPTIONAL) Enter the keywords
received-routes
then either the network address
(in dotted decimal format) or the network mask (in slash prefix format) to view all
information received from neighbors.
NOTE: Configure the
neighbor soft-reconfiguration inbound
command prior to viewing all the information received from the neighbors.
denied-routes
[
network [ network-
mask ]
(OPTIONAL) Enter the keywords
denied-routes
then either the network address (in
dotted decimal format) or the network mask (in slash prefix format) to view all
information on routes denied via neighbor inbound filters.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Added the ipv4 multicast and ipv6 unicast parameters.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
Border Gateway Protocol 433