Usage Information
The access name is an extended IP access list that denies PIM register packets to RP at the source DR based on
the multicast and group addresses. Do not enter this command before creating the access-list.
ip pim rp-address
Configure a static PIM rendezvous point (RP) address for a group or access-list.
Syntax
ip pim [vrf
vrf-name
] rp-address
address
{group-address
group-address mask
}
[override]
To remove an RP address, use the
no ip pim [vrf
vrf-name
] rp-address
address
{group-
address
group-address mask
} [override]
command.
Parameters
vrf
vrf-name
(OPTIONAL) Enter the keyword
vrf
followed by the name of the VRF.
NOTE:
Applies to specific VRF if input is provided, else applies to Default
VRF.
address
Enter the RP address in dotted decimal format (A.B.C.D).
group-address
group-address
mask
Enter the keywords
group-address
then a group-address mask, in dotted decimal
format (/xx), to assign that group address to the RP.
override
Enter the keyword
override
to override the BSR updates with static RP. The override
takes effect immediately during enable/disable.
NOTE:
This option is applicable to multicast group range.
Defaults
Not configured.
Command Modes
CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.10(0.0)
Introduced on the S6100-ON.
9.8(1.0)
Introduced on the Z9100-ON.
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.5(0.1)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
1208
PIM-Sparse Mode (PIM-SM)
