Dell S6100 Configuration Manual Download Page 602

Page: 602 / 1743

fip-snooping port-mode fcoe-trusted

Configure the port for bridge-to-bridge links. It is not recommended to use this command because multi-hop FSB is not supported.

Syntax

fip-snooping port-mode fcoe-trusted

To remove the bridge-to-bridge link configuration from the port, use the

no fip-snooping port-mode

fcoe-trusted

command.

Command Modes

INTERFACE

Command History

This guide is platform-specific. For command information about other platforms, see the relevant

Dell Networking

OS Command Line Reference Guide

Version

Description

9.10(0.0)

Introduced on the S6100–ON.

9.8(1.0)

Introduced on the Z9100–ON.

9.8(0.0)

Introduced on the S3048-ON and S4048-ON.

9.7(0.0)

This command is deprecated.

8.3.19.0

Introduced on the S4820T.

8.3.12.0

Introduced on the S4810.

8.3.16.0

Introduced on MXL 10/40GbE Switch IO Module.

Usage Information

NOTE:

This command is deprecated from the Dell Networking OS.

show fip-snooping config

Display the FIP snooping status and configured FC-MAP values.

Syntax

show fip-snooping config

Command Modes

•

EXEC

•

EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms, see the relevant

Dell Networking

OS Command Line Reference Guide

602

FIP Snooping

Summary of Contents for S6100
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for S6100

Reviews:

Dell S6100, Configuration Manual, Page: 602 / 1743

Search results

Summary of Contents for S6100

Reviews: