Parameters
ipv4 | ipv6 | mac
Enter the keyword
ipv4
or
mac
to identify the access list type to resequence.
access-list-name
Enter the name of a configured IP access list.
StartingSeqNum
Enter the starting sequence number to resequence. The range is from 0 to 4294967290.
Step-to-Increment
Enter the step to increment the sequence number. The range is from 1 to 4294967290.
Defaults
None
Command Modes
•
EXEC
•
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.10(0.0)
Introduced on the S6100-ON.
9.8(1.0)
Introduced on the Z9100–ON.
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.7(0.0)
Introduced on the S6000–ON.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
8.2.1.0
Introduced on the E-Series (IPv6).
8.1.1.0
Introduced on the E-Series (IPv4).
7.8.1.0
Increased the name string to accept up to 140 characters. Prior to 7.8.1.0, names were up
to 16 characters long.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
7.4.1.0
Introduced on the E-Series.
Usage Information
When you have exhausted all the sequence numbers, this feature permits re-assigning a new sequence number to
entries of an existing access-list.
seq
Assign a sequence number to a deny or permit filter in an IP access list while creating the filter.
Syntax
seq
sequence-number
{deny | permit} {
source
[
mask
] | any | host
ip-address
}}
[count [byte] | log] [dscp
value
] [ecn
value
] [fragments] [monitor [
session-
ID
]] [no-drop] [order]
196
Access Control Lists (ACL)