manualshive.com logo in svg

Dell S6100, Configuration Manual

The Dell S6100 Configuration Manual is a comprehensive guide that enables users to maximize the functionality of their Dell S6100 device. This manual can be easily downloaded for free from our website, allowing users to access valuable information and optimize their product experience.

Share
Download
background image

•

For a 40-Gigabit Ethernet interface, enter the keyword 

fortyGigE

 then the stack/

slot/port[/subport] information.

•

For a 50-Gigabit Ethernet interface, enter the keyword 

fiftyGigE

 then the stack/

slot/port/subport information.

•

For a 100-Gigabit Ethernet interface, enter the keyword 

hundredGigE

 then the 

stack/slot/port information.

•

For a port channel interface, enter the keywords 

port-channel

 then a number.

Defaults

Not configured.

Command Modes

INTERFACE VLAN

Command History

This guide is platform-specific. For command information about other platforms, see the relevant 

Dell Networking 

OS Command Line Reference Guide

.

Version

Description

9.10(0.0)

Introduced on the S6100–ON.

9.8(1.0)

Introduced on the Z9100–ON.

9.8(0.0P5)

Introduced on the S4048-ON.

9.8(0.0P2)

Introduced on the S3048-ON.

9.7(0.0)

Introduced on the S6000-ON.

9.2(1.0)

Introduced on the Z9500.

9.0.2.0

Introduced on the S6000.

8.3.19.0

Introduced on the S4820T.

8.3.11.1

Introduced on the Z9000.

8.5.1.0

Added support for 4-port 40G line cards on the E-Series.

8.3.7.0

Introduced on the S4810.

7.6.1.0

Introduced on the S-Series.

7.5.1.0

Introduced on the C-Series.

pre-6.2.1.1

Introduced on the E-Series.

Usage Information

When this command is configured, the VLAN is operationally UP if any of the interfaces specified in the 

track 

ip

 command are operationally UP, and the VLAN is operationally DOWN if none of the tracking interfaces are 

operationally UP.

If the 

track ip

 command is not configured, the VLAN's Layer 3 operational state depends on all the members of 

the VLAN.

The Layer 2 state of the VLAN, and the Layer 2 traffic, is not affected by the 

track ip

 command configuration.

Related Commands

•

interface vlan

 — configure a VLAN.

•

tagged

 — specify which interfaces in a VLAN are tagged.

Layer 2

943

Summary of Contents for S6100
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for S6100

Idem MPC Operating Instructions preview
MPC
Brand: Idem Pages: 2
KanexPro MX-HDBT8X818G Manual preview
MX-HDBT8X818G
Brand: KanexPro Pages: 16
CyberData 4-Port PoweredUSB 2.0 Hub 011006 Quick Reference Manual preview
4-Port PoweredUSB 2.0 Hub 011006
Brand: CyberData Pages: 4
Cudy GS1016 Quick Installation Manual preview
GS1016
Brand: Cudy Pages: 2
Waters Network Systems GS1016 Operating Manual preview
GS1016
Brand: Waters Network Systems Pages: 12
UNICOM SmartGST-2600M Specifications preview
SmartGST-2600M
Brand: UNICOM Pages: 1
West Mountain Radio PWRguard PLUS Operating Manual preview
PWRguard PLUS
Brand: West Mountain Radio Pages: 10
Dexon DIMAX404 User Manual preview
DIMAX404
Brand: Dexon Pages: 31
Sangamo RPTS Q550 Installation & User'S Instructions preview
RPTS Q550
Brand: Sangamo Pages: 2
Comtrend Corporation ES-7211PoE User Manual preview
ES-7211PoE
Brand: Comtrend Corporation Pages: 2
Hewlett Packard Enterprise FlexFabric 5940 Series Configuration Manual preview
FlexFabric 5940 Series
Brand: Hewlett Packard Enterprise Pages: 123
SICK WLL190T-2 Manual preview
WLL190T-2
Brand: SICK Pages: 19
Global Streams GlobeCaster STUDIO 4000 Manual preview
GlobeCaster STUDIO 4000
Brand: Global Streams Pages: 144
MRD TNM4000-TP36FF4X16G24P User Manual preview
TNM4000-TP36FF4X16G24P
Brand: MRD Pages: 38
H3C S6812 Series Installation Manual preview
S6812 Series
Brand: H3C Pages: 77
WAGO 852-1111 Mounting, Installation And Handling preview
852-1111
Brand: WAGO Pages: 36
SOMFY COMMANDE MURALE RTS Manual preview
COMMANDE MURALE RTS
Brand: SOMFY Pages: 2
Versa Technology VX-GPH1610 Quick Installation Manual preview
VX-GPH1610
Brand: Versa Technology Pages: 12

Brands by name

Popular brands

Load more brands