ip ospf priority
To determine the designated router for the OSPF network, set the priority of the interface.
Syntax
ip ospf priority
number
To return to the default setting, use the
no ip ospf priority
command.
Parameters
number
Enter a number as the priority. The range is from 0 to 255. The default is
1
.
Defaults
1
Command Modes
INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.10(0.0)
Introduced on the S6100-ON.
9.8(1.0)
Introduced on the Z9100-ON.
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.7(0.0)
Introduced on the S6000-ON.
9.2(1.0)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
pre- 6.1.1.1
Introduced on the E-Series.
Usage Information
Setting a priority of 0 makes the router ineligible for election as a designated router or backup designated router.
Use this command for interfaces connected to multi-access networks, not point-to-point networks.
Open Shortest Path First (OSPFv2 and OSPFv3)
1097