show ip igmp groups
View the IGMP groups.
Syntax
show ip igmp [vrf
vrf-name
] groups [group-address [detail] | detail |
interface
[
group-address
[detail]]]
Parameters
vrf
vrf-name
(OPTIONAL) Enter the keyword
vrf
followed by the name of the VRF to configure this
setting on that VRF.
group-address
(OPTIONAL) Enter the group address in dotted decimal format to view information on
that group only.
interface
(OPTIONAL) Enter the interface type and the interface information:
•
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then
the stack/slot/port/subport information.
•
For a 25-Gigabit Ethernet interface, enter the keyword
twentyFiveGigE
then the
stack/slot/port/subport information.
•
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the stack/
slot/port[/subport] information.
•
For a 50-Gigabit Ethernet interface, enter the keyword
fiftyGigE
then the stack/
slot/port/subport information.
•
For a 100-Gigabit Ethernet interface, enter the keyword
hundredGigE
then the
stack/slot/port information.
•
For a Loopback interface, enter the keyword
loopback
then a number from 0 to
16383.
•
For a port channel interface, enter the keywords
port-channel
then a number.
•
For a VLAN interface, enter the keyword
vlan
then a number from 1 to 4094.
detail
(OPTIONAL) Enter the keyword
detail
to display the IGMPv3 source information.
Command Modes
•
EXEC
•
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.10(0.0)
Introduced on the S6100–ON.
9.8(1.0)
Introduced on the Z9100–ON.
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.7(0.0)
Added support for VRF. Introduced on the S6000-ON.
9.5(0.1)
Introduced on the Z9500.
Internet Group Management Protocol (IGMP)
647