To delete a passive peer-group, use the
no neighbor
peer-group-name
peer-group passive
command.
Parameters
peer-group-name
Enter a text string up to 16 characters long as the name of the peer group.
Defaults
Not configured.
Command Modes
ROUTER BGP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.10(0.0)
Introduced on the S6100-ON.
9.8(1.0)
Introduced on the Z9100–ON.
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.7(0.0)
Introduced on the S6000–ON.
9.2(1.0)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.8.0
Introduced the
limit
keyword on the S4810.
8.3.7.0
Introduced on the S4810.
7.8.1.0
Introduced on the S-Series.
7.7.1.0
Introduced on the C-Series.
Usage Information
After you configure a peer group as passive, assign it a subnet using the
neighbor soft-reconfiguration
inbound
command.
For passive eBGP limits, the Remote AS must be different from the AS for this neighbor.
Related Commands
•
neighbor soft-reconfiguration inbound
— assign a subnet to a dynamically configured BGP neighbor.
•
— assign an indirectly connected AS to a neighbor or peer group.
neighbor remote-as
Create and specify the remote peer to the BGP neighbor.
Syntax
neighbor {
ip-address
|
peer-group-name
} remote-as
number
To delete a remote AS entry, use the
no neighbor {
ip-address
|
peer-group-name
} remote-as
number
command.
Border Gateway Protocol
393
